Complete disposal with integrated lifting plant

TitleItem NumberDescriptionNo StorageStockSafety StockUnit priceMinimum Order QuantityDiscountPrice AdjustablePacking Unit
Grease separator with integrated lifting plant LipuSmart-P-OB basic modelpg33538000.00000
Hand membrane pump 1½"0175.23.73
  • For fixing to wall
  • Incl. hose
    • Clear width: 48 x 80 mm
  • Incl, hose clamp
    • Clear width: 50 x 70 mm
    • Width: 12 mm
    • 2 pces required
  • Weight: 14.4 kg

000.00000
Connection ports ventilation0155.34.16
  • Made of PE-HD
  • DN70 (OD 75mm)

000.00000
Stop valve 1½"0159.10.12
  • For hand membrane pump
  • Weight: 1 kg

000.00000
Three way valve 1½"0159.10.14
  • For hand membrane pump
  • Weight: 3.3 kg

000.00000
Stop valve0155.34.18
  • Made of cast iron
  • Slide plate, spindle made of stainless steel, material grade 304
  • DN 100
  • Length (L): 50 mm
  • Spindle path (H1 – H2): 365 – 465 mm
  • Hand wheel diameter: 200 mm
  • Incl. seals and fixing material
  • Weight: 15 kg

000.00000
Stop valve DN 800154.51.93
  • Made of cast iron
  • 8 screws and nuts
  • 1 DN 80 seal
  • Length: 180 mm
  • Weight: 19.4 kg

000.00000
Stop valve7602.00.12
  • Made of cast iron
  • Penstock plate, spindle made from stainless steel, material grade 304
  • DN 100
  • Length (L): 50 mm
  • Spindle travel (H1 – H2): 365 – 465 mm
  • Manual wheel diameter: 200 mm
  • Weight: 15 kg

000.00000
Stop valve7604.00.12
  • Made of cast iron
  • Penstock plate, spindle made from stainless steel, material grade 304
  • DN 150
  • Length (L): 60 mm
  • Spindle travel (H1 – H2): 478 – 639 mm
  • Manual wheel diameter: 200 mm
  • Weight: 29.4 kg

000.00000
Flange connection part7602.00.13
  • Stainless steel, material grade 304
  • Seal: NBR
  • DN 100
  • Length (L): 75 mm
  • Weight: 6.5 kg

000.00000
Flange connection part7604.00.13
  • Stainless steel, material grade 304
  • Seal: NBR
  • DN 150
  • Length (L): 75 mm
  • Weight: 10 kg

000.00000
Inlet valve DN 1000175.13.84
  • Made of PVC
  • 110 mm push socket on both sides with rim sealing ring
  • Overall dimensions: 176 x 330 mm (L x H)
  • Weight: 3.1 kg

000.00000
Inlet valve DN 1500175.13.85
  • Made of PVC
  • 160 mm push socket on both sides with rim sealing ring
  • Overall dimensions: 226 x 510 mm (L x H)
  • Weight: 7 kg

000.00000
Sealing ring0159.37.97
  • As additional component for pressure line DN 80
  • Weight: 0.3 kg

000.00000
Heating rod0155.35.28
  • Weight: 15 kg

000.00000
PIPE connection set ND 150 for Grease Separators0174.92.47
  • For connection of the grease separator feed line
  • From stainless steel, material grade 316 L
  • EPDM seal
  • DN 150
  • 2 x bends 45°
  • 1 x intermediate piece 250 mm
  • 1 x calm region 1500 mm
  • Weight: 12.7 kg

000.00000
PIPE connection set ND 100 for Grease Separators0174.92.46
  • For connection of the grease separator feed line
  • From stainless steel, material grade 316 L
  • EPDM seal
  • DN 100
  • 2 x bends 45°
  • 1 x intermediate piece 250 mm
  • 1 x calm region 1000 mm
  • Weight: 5.2 kg

000.00000
Grease separator with integrated lifting plant LipuSmart-P-OD extension stage 1pg33539000.00000
Grease separator with integrated lifting plant LipuSmart-P-OA extension stage 3pg33540000.00000
Grease separator with integrated lifting plant LipuSmart-P-OAP extension stage 3pg33541000.00000
Grease layer thickness measuring device3300.11.50
  • For electronic measurement of layer of grease
  • Suitable for liquid and/or congealing grease
  • Measuring device with plug and used connecting cable, length: 3 m
  • With two voltage-free changeover contacts to display full warning (80%) and advance warning of fill level (50%)
  • With visual display of fill level
  • With heated probe rod to increase reliability of operation
  • Operating voltage: 230VAC/5 VA
  • Max consumption approx. 12W
  • Weight: 2.8 kg

000.00000
Grease layer thickness measuring device Multi Control3300.12.50
  • To determine the disposal intervals of grease separators
  • Suitable for liquid and/or harden fats
  • Delineation with colour-touchpanel
  • Continuous measure in percent
  • With integrated SD-card (4GB) for recording of the measuring process
  • With headed sounding stick (temperature is adjustable) to increase the operation safety
  • Three free of potential contacts for outoput of pre-alarm (adjustable), full-alarm (adjustable) and error
  • Measuring stick with adjusting scale
  • Delineation with plug-in cable connection, 3 m
  • Service voltage: 100 240VAC 50/60 Hz, 2 A
  • Power: ca. 43 W
  • Weight: 2.7 kg

000.00000
Smell neutralisation7980.80.00
  • Lockable control cabinet
    • From stainless steel, material grade 304
    • Ground surface
    • With side ventilation slots
  • Integrated timer
  • Incl. odour neutralisers: 9 l
  • With dosing pump for reliable discharge
  • Chemical resistant dosing hose
  • Signal column for status monitoring
  • PG gland for on-site connection
  • Control cabinet dimensions: 380 x 600 x 210 mm (W x H x D)
  • System ready to plug in
    • Incl. cable: 1.5 m
  • 230 V socket to be produced on-site
  • Weight: 36.2 kg

000.00000
Signalling unit0150.26.73
  • Self loading
  • With volt free contact
  • Visible and audible
  • Without floater
  • For mounting outside the explosive-area
  • Housing: 125 x 175 x 75 mm
  • Protection level: IP65
  • Operating voltage: 230 V/AC 50/60 Hz
  • Plug and use with cable: 2 m
  • Weight: 1.4 kg

000.00000
Signal horn0178.61.94
  • 230V AC
  • Power consumption: 15mA
  • 172x70x78mm (LxBxT)
  • Protection: IP33
  • 92 dB(A)
  • Weight: 0.3 kg

000.00000
Flashing light0178.62.08
  • 230V
  • Power consumption: 70 mA
  • Weight: 0.5 kg

000.00000
Heating rod7300.01.00
  • To liquefy grease layer
  • Incl. control
  • Electrical connector
    • 400 V/50 Hz/6.0 kW
  • Weight: 15 kg

000.00000
Filling device3300.11.22
  • Free outlet as per DIN 1988 Part 4
  • For connection to drinking water supply
  • With ball valve R ¾"
  • With pressure relief valve
  • Weight: 3.5 kg

000.00000
Viewing window3300.11.10
  • Nominal width: DN 200
  • With screen wiper
  • Weight: 3.2 kg

000.00000
Coarse trap DN 1003667.00.04
  • For installation in vertical pipes DN 100 going to grease separator
  • Round shape with
    • Coupling socket seal (material SBR) on inlet and spigot on outflow
    • Basket made from stainless steel, material grade 316 to retain coarse substances
    • Odour-proof maintenance opening DN 450
  • Weight: 9.7 kg

000.00000
Coarse trap DN 1503667.00.05
  • For installation in vertical pipes DN 150 going to grease separator
  • Round shape with
    • Coupling socket seal (material SBR) on inlet and spigot on outflow
    • Basket made from stainless steel, material grade 316 to retain coarse substances
    • Odour-proof maintenance opening DN 450
  • Weight: 12.6 kg

000.00000
LipuSmart AppSoftware
  • Benefits for maintenance, monitoring and operation
  • Checklists for setting up the grease separators and lifting system unit
  • Grease separator protocol system
  • Assurance of control settings
  • Connection via Bluetooth interface
  • Operating systems
    • Android
    • IOS
  • Download:
    • Http://aco.me/lipusmartapp
    • QR-code in the data sheet

000.00000

Subpages